Our factory provides China Optical Fiber, Indoor Fiber Optic Cable, ect. Everyone knows us for our excellent service, fair prices, and high caliber products. You are welcome to place an order.
The Invisible bow-type drop fiber optic cable is made by placing the invisible tight sleeve in the center, placing two parallel reinforcement elements on both sides, and finally extruding a layer of sheath.
The structure of the glass yarn access building fiber optic cable is to put the Φ250μm optical fiber into a loose tube made of high modulus material, and fill the loose tube with waterproof material. The loose tube is covered with a layer of glass fiber reinforcement components, and the outermost layer is extruded with a low smoke zero halogen material (LSZH, low smoke, halogen free, flame retardant) sheath.
The structure of aramid yarn access building fiber optic cable is to put Φ250μm optical fiber into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. The loose tube is coated with a layer of aramid reinforcement element, and then a layer of double-sided plastic coated steel belt (PSP) is longitudinally wrapped, and a layer of low smoke zero halogen material (LSZH, low smoke, halogen free, flame retardant) is extruded on the outside.
Flat fiber ribbon fiber optic cable uses optical fiber ribbon as the optical transmission medium, covered with a layer of aramid as a force-reinforced unit, and extruded with a layer of polyvinyl chloride (PVC) or low-smoke zero-halogen material (LSZH, low-smoke, halogen-free, flame-retardant) sheath.
Indoor ribbon fiber optic cable uses fiber optic ribbon as the optical transmission medium. The fiber optic ribbon is inserted into a loose tube made of high modulus material and then coated with a layer of aramid reinforcement. The outermost layer is extruded with a polyvinyl chloride (PVC) sheath.
Mobile fiber optic cable MOC uses micro-tubes (made of optical fiber and special materials) as photon units. The sub-units are housed in a low-smoke, halogen-free sheath of a special cross-section. Two parallel FRPs are used as reinforcement members. There are markings on the outside of the sheath to indicate the direction of the opening.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy