+86-15651923699
shenwei@orientalfiber.com
English
Jiangsu Xuben Photoelectric Technology Co., Ltd.
Jiangsu Xuben Photoelectric Technology Co., Ltd.
Products

China G.657.A1 Bend-insensitive Single-mode Fiber Manufacturer, Supplier, Factory

As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we've been the lowest around for G.657.A1 Bend-insensitive Single-mode Fiber, You would not have any communication problem with us. We sincerely welcome prospects all around the globe to call us for business enterprise cooperation.
G.657.A1 Bend-insensitive Single-mode Fiber, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

Related Products

Hot Products

  • Duplex Flat Fig 8 Zipcord Fiber Optic Cable

    Duplex Flat Fig 8 Zipcord Fiber Optic Cable

    The duplex flat fig 8 zipcord fiber optic cable uses Φ900μm or Φ600um tight-buffered optical fiber as the optical transmission medium, covered with a layer of aramid as a force-reinforced unit, and extruded with an 8-shaped polyvinyl chloride (PVC) or low-smoke zero-halogen material (LSZH, low-smoke, halogen-free, flame-retardant) sheath.
  • Simplex Fiber Optic Cable

    Simplex Fiber Optic Cable

    The simplex fiber optic cable uses a single Φ900μm or Φ600μm tight-buffered optical fiber as the optical transmission medium, covered with a layer of aramid as a reinforcement, and extruded with a layer of polyvinyl chloride (PVC) or low-smoke zero-halogen material (LSZH, low-smoke, halogen-free, flame-retardant) sheath.
  • Stranded Loose Tube Non-metallic Strength Member Armored Fiber Optic Cable

    Stranded Loose Tube Non-metallic Strength Member Armored Fiber Optic Cable

    The structure of stranded loose tube non-metallic strength member armored fiber optic cable is to put 250μm optical fiber into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. The center of the cable core is a non-metallic reinforcement core (FRP). For optical cables with certain cores, a layer of polyethylene (PE) needs to be extruded outside the non-metallic reinforcement core.
  • Mobile Fiber Optic Cable MOC

    Mobile Fiber Optic Cable MOC

    Mobile fiber optic cable MOC uses micro-tubes (made of optical fiber and special materials) as photon units. The sub-units are housed in a low-smoke, halogen-free sheath of a special cross-section. Two parallel FRPs are used as reinforcement members. There are markings on the outside of the sheath to indicate the direction of the opening.
  • Wall-mounted Pre-connectorized Fiber Optic Cable Distribution Box

    Wall-mounted Pre-connectorized Fiber Optic Cable Distribution Box

    The bottom shell and the top cover of this wall-mounted pre-connectorized fiber optic cable distribution box are fixed with screws and are removable. It is made of PP, which is moisture-proof, waterproof, dust-proof, and anti-aging, with a protection level of up to IP68.
  • 48 Fibre Core Pre-connectorized Fiber Optic Cable Distribution Box

    48 Fibre Core Pre-connectorized Fiber Optic Cable Distribution Box

    The material of this 48 fibre core pre-connectorized fiber optic cable distribution box is PP or PC+ABS. It is moisture-proof, waterproof, dust-proof, anti-aging, and the protection level can reach IP65. We have 2 types of joint trays available.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept