Jiangsu Xuben Photoelectric Technology Co., Ltd.
Jiangsu Xuben Photoelectric Technology Co., Ltd.
Products

China Butterfly Lead-in Cable for Armored Pipe Manufacturer, Supplier, Factory

Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Butterfly Lead-in Cable for Armored Pipe, Bow-type Drop Cable, We welcome all with the consumers and pals to call us for mutual positive aspects. Hope to do additional company along with you.
Butterfly Lead-in Cable for Armored Pipe, We've got more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information make sure you do no hesitate to contact us.

Hot Products

  • Single-mode Optical Fiber G.657.A1

    Single-mode Optical Fiber G.657.A1

    Single-mode optical fiber G.657.A1 contains all the characteristics of single-mode fiber and provides good resistance to microbending. It has low macrobending sensitivity and low water peak level. It is fully optimized for use in the O-E-S-C-L band (1260 -1625 nm). It can resist extra losses well due to low macrobending in the 1625 nm wavelength region. This not only supports L-band applications, but also allows for easy installation without excessive care when storing the fiber (for example, in a splice box). For cable use within buildings, G657A1 fiber supports small cable bend radius and compact installation.
  • Multi-mode Optical Fiber OM1

    Multi-mode Optical Fiber OM1

    Multi-mode Optical Fiber OM1 (62.5/125μm) meets or exceeds the ISO/IEC 11801-1 OM1 specification, IEC 60793-2-10 A1-OM1 specification, and TIA-492AAAF A1-OM1 specification.
  • ASU Fiber Optic Cable

    ASU Fiber Optic Cable

    The structure of ASU fiber optic cable is to put 250μm optical fiber into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. The loose tube and FRP are SZ twisted together. Water-blocking yarn is added to the cable core to prevent water seepage, and then a polyethylene sheath is extruded to form a cable. A ripcord can be used to tear it open under the cable sheath.
  • Uni-tube Non-metallic Lighting Anti-rodent Fiber Optic Cable

    Uni-tube Non-metallic Lighting Anti-rodent Fiber Optic Cable

    The fibres, single-mode or multi-mode, are positioned in a loose tube mode of the high modulus PETG. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to keep the cable watertight. And wrapping of fibre reinforced plastic (FRP) bars. The uni-tube non-metallic lighting anti-rodent fiber optic cable is completed with a polyethylene (PE) sheath.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept