+86-15651923699
shenwei@orientalfiber.com
English
Jiangsu Xuben Photoelectric Technology Co., Ltd.
Jiangsu Xuben Photoelectric Technology Co., Ltd.
Products

China Micro-cluster Optical Cable Manufacturer, Supplier, Factory

We will devote ourselves to giving our esteemed buyers using the most enthusiastically thoughtful services for Micro-cluster Optical Cable, Mobile Fiber Optic Cable, You would not have any communication problem with us. We sincerely welcome clients all over the world to get hold of us for organization cooperation.
Micro-cluster Optical Cable, We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we have been looking forward to the mutual cooperation with all friends at home and abroad and we'll create a bright future of business.

Related Products

Hot Products

  • Stranded Loose Tube Non-metallic Strength Member Armored Fiber Optic Cable

    Stranded Loose Tube Non-metallic Strength Member Armored Fiber Optic Cable

    The structure of stranded loose tube non-metallic strength member armored fiber optic cable is to put 250μm optical fiber into a loose tube made of high modulus material, and the loose tube is filled with waterproof compound. The center of the cable core is a non-metallic reinforcement core (FRP). For optical cables with certain cores, a layer of polyethylene (PE) needs to be extruded outside the non-metallic reinforcement core.
  • FC MM 2.0/3.0mm Connector

    FC MM 2.0/3.0mm Connector

  • Uni-tube Non-metallic 73 Sheath Light-weight Lighting Anti-rodent Fiber Optic Cable

    Uni-tube Non-metallic 73 Sheath Light-weight Lighting Anti-rodent Fiber Optic Cable

    The structure of uni-tube non-metallic 73 sheath light-weight lighting anti-rodent fiber optic cable is to put single-mode optical fiber or multi-mode optical fiber into a loose tube made of high modulus polyester material, and the tube is filled with waterproof compound. Water-blocking material is added to the loose tube to ensure the waterproof performance of the optical cable. The loose tube is wrapped with FRP rod, and a layer of polyethylene inner sheath is extruded on the cable core. After the FRP belt is longitudinally wrapped, a polyethylene outer sheath is extruded to form a cable.
  • Uni-tube Non-metallic Lighting Anti-rodent Fiber Optic Cable

    Uni-tube Non-metallic Lighting Anti-rodent Fiber Optic Cable

    The fibres, single-mode or multi-mode, are positioned in a loose tube mode of the high modulus PETG. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to keep the cable watertight. And wrapping of fibre reinforced plastic (FRP) bars. The uni-tube non-metallic lighting anti-rodent fiber optic cable is completed with a polyethylene (PE) sheath.
  • Pre-connectorized Fiber Optic Cable Distribution Box with 1 16 PLC Splitter

    Pre-connectorized Fiber Optic Cable Distribution Box with 1 16 PLC Splitter

    The material of this pre-connectorized fiber optic cable distribution box with 1 16 PLC splitter is PP. The bottom shell and the upper cover are fixed with screws and can be disassembled. The protection level can reach IP68. It is equipped with 1x2 FBT optical splitter + 1x16 PLC optical splitter inside.
  • Duplex Flat Fig 8 Zipcord Fiber Optic Cable

    Duplex Flat Fig 8 Zipcord Fiber Optic Cable

    The duplex flat fig 8 zipcord fiber optic cable uses Φ900μm or Φ600um tight-buffered optical fiber as the optical transmission medium, covered with a layer of aramid as a force-reinforced unit, and extruded with an 8-shaped polyvinyl chloride (PVC) or low-smoke zero-halogen material (LSZH, low-smoke, halogen-free, flame-retardant) sheath.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept